A freezer sometimes gets scratched and rusted but remains in good working condition. Painting your deep freezer makes it more pleasant to look at. Use spray paint made specifically for appliances. Choosing basic white, the factory color of most freezers, fits most needs in a home or business.
Things You'll Need:
Things You Will Need
Warnings:
- Ventilation is needed while using spray paint. Wear eye protection and a mask over your nose and mouth.
Wash the entire freezer with cleaner, removing any dirt, grease or smoke residue. Rinse the rags and wipe down completely, removing any cleaner remaining.
Sand lightly over the painted surface. Apply more pressure to remove any rust spots on the freezer. Wipe off the freezer with wet rags to remove any sanding dust and allow it to dry.
Tape off the outside of the rubber gasket, or seal. Tape newspaper over the inside of the lid to keep paint from getting on it. Leave no part of the gasket or inner part of the lid exposed.
Tape newspaper to the entire inside of the freezer. The interior liner of the freezer needs protection from overspray. Tape off or remove any handles or chrome emblems.
Read and follow the manufacturer's directions for the primer, shaking thoroughly before using. Use horizontal sweeping motions while painting to avoid pooling of the primer, causing runs. Cover the entire exposed area with primer. Allow to dry.
Repeat the same process with appliance paint. Cover the entire primed area with multiple light coats of paint, not one or two heavy coats. Allow to dry between coats.
Allow the freezer to dry thoroughly. Then remove all the painter's tape and newspaper. Replace any handles or chrome that were removed.