Diamond Club

Click to play our newest game, solitaire!

Spade Heart

How to Make a Toy Hammock Out of a Sheet

Ray Robert Green/Demand Media

Things You'll Need:

  • 1 flat sheet, any size
  • Coordinating color of sewing thread
  • Tape measure
  • Scissors
  • Straight pins
  • Drill
  • Marker
  • 3 large cup hooks


When deciding on placement height and location of hooks, the corners need to be considerably higher than the middle in order to form a large cradle in which to place the stuffed toys.

Consider the type of materials the walls are finished with and the amount of weight they will be supporting, and adjust the mounting mechanisms accordingly.

The heavier the load, the longer the threaded end of the hook needs to be.


  • Warn children to never use the hammock for any purpose other than to hold stuffed toys. Misusing the hammock could result in injury and harm to the child, the finish on the walls and the hammock.

If stuffed animals are taking over your child’s room, create a simple hammock, which gets them off the floor in style. This hammock is moderately easy to make and requires little crafting or sewing experience. The finished product provides a convenient and affordable way to organize, store and display a stuffed toy collection. Sheets are available in a wide array of colors and patterns to match any decor, allowing the creation of a customizable and attractive storage solution for any child’s bedroom or play area.

Ray Robert Green/Demand Media

Cut the sheet into a square. Lay the sheet flat on the floor and measure the width. Mark the sheet lengthwise with a marker at the distance of the width measurement. Cut across the sheet from one side to the other at the marker.

Ray Robert Green/Demand Media

Fold the sheet from one corner to the other to form a triangle. Fold over each edge by 1 inch and place straight pins to hold the folds in place every 1/2 inch to an inch around the three sides. Place pins approximately a 1/2 inch from the outer edges and sew a straight stitch seam about 1/4 inch from outer edge on all three sides.

Ray Robert Green/Demand Media

Cut a 1-inch slit in each of the 3 corners diagonally from the center toward the corner, approximately 2 inches inward from the tip of the corner. Sew, using a zigzag stitch, around the edges of each slit, forming the equivalent of oversized button holes.

Ray Robert Green/Demand Media

Drill one hole in the corner of the room. Screw a hook into the drilled hole. Place the slit located on the top corner point of the triangular shaped hammock on the hook. Lift one of the other corners to the desired level and put a dot on the wall to indicate the location of the next hook.

Ray Robert Green/Demand Media

Drill a hole on that dot and place the second hook. Repeat this step with the final hook in the corner of the adjacent wall. Hang the remaining two slits of the hammock on the hooks.

Our Passtimes