How to Use Tamiya Paints

By Marsanne Petty
Tamiya, models
model car. hobby, collection image by Ana Vasileva from Fotolia.com

Tamiya paints generally are used for painting model planes, cars, boats and trains. Animals and houses, farm buildings and other general purpose plastic modeling items may be painted with Tamiya paints as well. The important thing to remember is that these paints are for models only. There are several different kinds of Tamiya paints, but all of them are acceptable for any type of plastic model kits.

Tamiya Spray Paints

Prepare your work surface. Either work outside where over-spray will not be a problem, or cover your work table with a sheet of plastic. Shake the can of Tamiya lacquer spray paint thoroughly to make sure that the particles of paint are mixed properly. Ensure that you dispose of the plastic sheeting in a lined trash can.

Spray a very light coat of paint on the model. Allow the paint to dry for four hours. Lacquer is the only paint available from Tamiya in a spray can version. All other Tamiya paints have to be brushed on.

Coat the plastic model again with Tamiya lacquer spray paint. Wait for the paint to dry for four hours. If you want the color to be darker, continue to add layers of paint, waiting for them to dry between applications.

Tamiya Brush Paints

Leave small pieces of plastic models attached to the sprue (the connector to which the pieces are attached). This will avoid having to use tweezers to hold the pieces, which could leave marks in the paint.

Apply an even coat of Tamiya brush paints to one side of the pieces on the sprue. Allow the paint to dry for four hours.

Add more paint to the first side of the sprue if you need the paint to be darker. If not, flip the sprue over and paint the back sides of the pieces. Allow the paint to dry for four hours. Add as many coats as needed, allowing four hours' drying time between each coat.

Remove the painted model pieces from the sprue and carefully brush paint on the areas where the pieces were connected to the sprue. Skipping this step may leave some unpainted parts on your completed model.

About the Author

Marsanne Petty has been a writer and photographer for over ten years, and is currently pursuing the combination in tandem. She attended Madison Community College, receiving a degree in Administration. She has published several articles for magazines, including Jack Magazine, and the local newspaper, the Jasper News. Her latest creation, a pictoral history of Hamilton County, Florida, was published in early 2009 through Arcadia Publishing.